The 15" BESERKER HANDGUARD

Handguard is 6063 extruded aluminum.
Anodizing is class 2 type 3 hardcoat in accordance with MIL-A-8625.
CNC machined to exacting tolerances for maximum weight removal.
MLOKS are machined to Magpul technical data package specs.
Picatinny rails meet MIL-STD 1913 specs.


Barrel nut is 4140 pre-heat treated steel.
CNC machined to exacting tolerances for maximum weight removal.
We recommend no more than 50 ft. lbs. of torque.
Since gas tube timing is a non-issue, 50 ft. lbs. is ample torque.
Melonited finish otherwise known as black nitride.

Hardware is 18-8 stainless steel with a black oxide finish.
We recommend no more than 35 inch lbs. of torque.

COMING SOON

The 15"/13" BESERKER LITE HANDGUARD

Handguard is 6063 extruded aluminum.
Anodizing is class 2 type 3 hardcoat in accordance with MIL-A-8625.
CNC machined to exacting tolerances for maximum weight removal.
MLOKS are machined to Magpul technical data package specs.
Picatinny rails meet MIL-STD 1913 specs.


Barrel nut is 4140 pre-heat treated steel.
CNC machined to exacting tolerances for maximum weight removal.
We recommend no more than 50 ft. lbs. of torque.
Since gas tube timing is a non-issue, 50 ft. lbs. is ample torque.
Melonited finish otherwise known as black nitride.

Hardware is 18-8 stainless steel with a black oxide finish.
We recommend no more than 35 inch lbs. of torque.

The 15" 8.8oz BESERKER HANDGUARD

Handguard is 6063 extruded aluminum.
Anodizing is class 2 type 3 hardcoat in accordance with MIL-A-8625.
CNC machined to exacting tolerances for maximum weight removal.
MLOKS are machined to Magpul technical data package specs.
Picatinny rails meet MIL-STD 1913 specs.


Barrel nut is 4140 pre-heat treated steel.
CNC machined to exacting tolerances for maximum weight removal.
We recommend no more than 50 ft. lbs. of torque.
Since gas tube timing is a non-issue, 50 ft. lbs. is ample torque.
Melonited finish otherwise known as black nitride.

Hardware is 18-8 stainless steel with a black oxide finish.
We recommend no more than 35 inch lbs. of torque.

EVO G2 Competition Bolt Carrier Group is not your average Nickle Boron this is the new patented EXO - NiB.  EXO IS TWICE as good in every category than traditional Nickel Boron.  EVO's coating is unmatched by any competing NiB technology.  Better heat resistance & Coefficient of Friction while remaining cost effective have made EVO our best selling Carrier to date.

The Competition  EVO has been designed to run in AR15 configurations using a gas tube that is MID LENGTH OR LONGER and a REDUCED RECOIL SYSTEM.  The milspec buffer and spring are designed to be used with heavy standard BCG's & will cause damage to you bolt and/or carrier.  However, by adding an adjustable gas system, the Taccom recoil buffer, and Enhanced reduced power spring, overall recoil is significantly reduced.  The  NiB(EXO) coating is twice as durable and has a coefficient of friction of 0.08.  Unlike traditional NiB the EXO has the appearance of chrome and is even easier to clean.  All Iron City Rifle Works bolt carriers feature forward assist while remaining light weight.  Our EVO (BCG) is paired with our matching Carpender-158 Enhancd Bolt.  We finished it off by adding our Enhanced Reliability kit giving you a BCG that can handle the most extreme environments. 

Competition Bolt Carrier Groups are designed for 556 & MUST be used with a reduced recoil system designed for light weight carriers.

*Iron City Rifle Works HIGHLY recommends using an adjustable gas system and the TACCOM reduced recoil buffer and spring for best results.

C4V G2 COMPETITION ENHANCED (BCG)

C4V (TiN) provides excellent wear resistance with a hardness of 2600 Vickers.  C4V is a (PVD) coating (TiN), however one look at C4V and you will know this is not your average TiN.  It has a coefficient of friction 0.4 and only 2 microns thick making it a major improvement  over MilSpec.  Our Enhanced Bolt made of Carpenter 158 is coated to match.  Our G2 carrier weighs only 6.8oz

Why choose C4V:

• FEATURING FORWARD ASSIST
• G2 CARRIER WEIGHT 6.8oz
• LESS FELT RECOIL
• INCREASED WEAR RESISTANT
• FASTER CYCLE RATE
• IMPROVED RELIABILITY
• 2600 VICKERS
• COEFFICIENT OF FRICTION 0.4

Competition Bolt Carrier Groups are designed for 556 & MUST be used with a reduced recoil system designed for light weight carriers.

*Iron City Rifle Works HIGHLY recommends using an adjustable gas system and a reduced recoil buffer and spring for best results.

ECLIPSE Enhanced G2 Competition bolt carrier group.

ECLIPSE is a (PVD) and  with a coefficient of friction - 0.3. Our Enhanced matching bolt is constructed of Carpenter 158 steel and includes the enhanced reliability kit.  Not only is the  ECLIPSE great looking it is slick, durable & reliable

Why choose ECLIPSE:

FEATURING FORWARD ASSIST

CARRIER WEIGHT ONLY 6.9oz

BCG WEIGHTING ONLY 8.8oz

LESS FELT RECOIL

INCREASED WEAR RESISTANCE

INCREASED CYCLE RATE

EASE OF CLEANING

IMPROVED RELIABILILTY

1800 VICKERS

COEFFICIENT OF FRICTION 0.3

EXCELLENT CHEMICAL & CORROSION RESISTANCE

HIGH RELIABILITY IN DRY OPERATIONS

Competition Bolt Carrier Groups are designed for 556 & MUST be used with a reduced recoil system designed for light weight carriers.

*Iron City Rifle Works HIGHLY recommends using an adjustable gas system and a reduced recoil buffer and spring for best results.

EVO S1 Drop-in (BCG) 

Advanced NiB Technology

DROP IN READY

Standard Weight BCG

556/223/300BlkOut/224Vakyrie/6.5Grendel/6.8SPC

The S1 BCG was created for use in real world applications without all the disadvantages of MILSPEC coatings. The EVO coating is the same gen 2 NiB coating used on our Competition Series BCG.

The NiB coating is twice as durable as traditional NiB and has a coefficient of friction of 0.08. Unlike traditional NiB the EVO has the appearance of chrome and is even easier to clean.

EVO S1 Drop-in (BCG) 

Advanced NiB Technology

DROP IN READY

Standard Weight BCG

458SOCOM

The S1 BCG was created for use in real world applications without all the disadvantages of MILSPEC coatings. The EVO coating is the same gen 2 NiB coating used on our Competition Series BCG.

The NiB coating is twice as durable as traditional NiB and has a coefficient of friction of 0.08. Unlike traditional NiB the EVO has the appearance of chrome and is even easier to clean.

EVO S1 Drop-in (BCG) 

Advanced NiB Technology

DROP IN READY

Standard Weight BCG

224 VALKYRIE/6.8SPC

The S1 BCG was created for use in real world applications without all the disadvantages of MILSPEC coatings. The EVO coating is the same gen 2 NiB coating used on our Competition Series BCG.

The NiB coating is twice as durable as traditional NiB and has a coefficient of friction of 0.08. Unlike traditional NiB the EVO has the appearance of chrome and is even easier to clean.

Reduce your overall recoil, and muzzle flip of your AR-15 with our Enhanced Carbine & Rifle Competition Recoil Spring.

A MUST HAVE WITH ANY LOW MASS BCG.

Our recoil spring has a 10% reduced power rating. It will aid in reducing muzzle flip and dip as it will reduce the speed of the BCG as it goes back into battery.

Made to mil Spec with one exception..... our spring is made from corrosion resistant stainless steel.


Recommended for use with low recoil buffer, adjustable gas system and any of our G2 Competition bolt carrier groups.

Iron City Rifle Works AR-15 Titanium Extended Takedown Pin Set are made of high strength titanium for weight reduction and corrosion resistance. Compatible with all milspec lower receivers.

• Precision CNC machined out of Ti-6Al-4V (structural aircraft grade 5 titanium).
• 50% lighter than other extended pins
• Compatible with AR-15 .250" diameter pivot and takedown holes.
• TiN coated & Black PVD

PCC/AR9 C4V Coated Titanium Firing Pins

Coated in our proprietary C4V TiN

Grade5 Titanium

Fits all standard AR9 BCGS

Why choose a C4V Coated Titanium Firing Pin:

45% LIGHTER THAN MILSPEC

FASTER DOUBLE TAPS

HARDER/STRONGER

OUR COATINGS MAKES CLEANING INCREDIBLY FAST & EASY!!

THE ULTIMATE UPGRADE TO ANY PCC/AR-9

Best price we have seen anywhere!

For carbine buffer tubes only
For use in blow back actions only
Comes with TACCOM Rifle spring
Comes with Return Cushion
6.2 ounces
3 stage action

Description

The TACCOM adjustable PCC buffer system is one of the first systems out there that not only allows you to change the buffer spring to your desired liking, it also allows for a 2nd stage, the final ½ of travel to also be adjusted so that the buffer doesn’t slam into the end of the buffer tube and in effect reduce felt recoil.

Adding the TACCOM cushion is basically adding a 3rd stage that will keep the shock down from the entire bolt/buffer on the rebound, hitting the backend of your barrel. This cushion is between the bolt and buffer and helps smooth out the entire cycle of the rifle.

RedMohawk CopperHead  PCG (pistol carrier group) 

The RedMohawk was designed for reliability, working with every AR9 it was was tested with. CopperHead is a (PVD) coating  with a coefficient of friction - 0.2.  Not only is the CopperHead great looking it is slick, durable & reliable.

For faster shooting & extreme reliability pair it up with the TACCOM 9mm recoil system also sold here. 

Why choose RedMohawk ECLIPSE:

USES STANDARD AR15 EXTRACTOR

LESS FELT RECOIL

INCREASED WEAR RESISTANCE

INCREASED CYCLE RATE

EASE OF CLEANING

IMPROVED RELIABILILTY

1800 VICKERS

COEFFICIENT OF FRICTION 0.2

EXCELLENT CHEMICAL & CORROSION RESISTANCE

HIGH RELIABILITY IN DRY OPERATIONS

IRON CITY RIFLE WORKS TITANIUM FIRING PINS

LIMITED EDITION PVD BLUE

Why choose a PVD BLUE Coated Titanium Firing Pin:

45% LIGHTER THAN MILSPEC

FASTER DOUBLE TAPS

HARDER/STRONGER

OUR  COATINGS MAKES CLEANING INCREDIBLY FAST & EASY!!

THE ULTIMATE UPGRADE TO ANY BCG

Best price we have seen anywhere!

ICRW AR-9 BCG 

Coated in IndustrialWorn  NiB

Compatable with Glock Magazines